Earlier in the week, I strained off the banana wine into a demijohn and it now looks like this;

 

 

 

 

Not very appetising at the moment, is it?  Banana wine needs more racking than other wines due to dropping a lot of sediment.  Once it does clear, it will be a lovely golden colour.


My Summer Lightning is also in the keg and priming as we speak.  In a couple of days, it will go into my cool garage to condition for a few weeks.  That's the plan!  It is tasting lovely, even at this early stage, so it might be a problem keeping my hands off it!!

Raspberry Beer

Just tasting the raspberry beer I mentioned here

It's very nice and is quite dry (much like real raspberries).  The only problem is lack of fizz.  I batch primed the 2 gallons, bottled, and left at 20 degrees for a week but still no fizz.  It is not quite flat as there is a bubbly feeling on the tongue.  At first, I thought that pressure may have been leaking from under the caps on the bottles, but the plastic bottles (which did feel firm as though they had some pressure behind them) were the same.   Oh well, back to the drawing board!



Quick Update....

This is what I woke up to this morning.......!

 



 

 

 

The yeast is obviously doing its job well.  Also, the bitter aroma it had yesterday has been replaced by a lovely fruity/spicy aroma.  If it tastes half as good as it smells, I'll be chuffed :-)

 

 

 

Between all the beer-making shenanigans yesterday, I managed to mince the wheat to add to my banana wine.  

It has formed a crust on top of the wine and will need stirring once or twice a day to keep everything moist and get the flavours working.  I'll ferment it 'on the pulp' for about a week before straining into a demijohn. 

All Grain Brew Day #1 - Summer Lightning Clone



I chose this recipe after reading about 'Demon Valley' brewery's first all grain brew day and, seeing as the ingredients are fairly straight forward, decided it would also be my first brew.

 

Ingredients;

•5kg Pale Ale Malt
•46g Challenger Hops @ 90 minutes
•15g Goldings Hops @ 15 minutes
•9g Goldings Hops @ Flameout/Poweroff
•Safale S-o4 yeast

I set my alarm for 0700 this morning but was awoken by a bad dream, in which my boiler wouldn't boil and kept cutting out (see how this brewing lark affects you?).

I got out of bed and measured out 16 litres of water.

0700 - The water goes into the boiler to be heated to 71.6 degrees for mashing.

The most important step in brewing and wine making is, of course, sterilising everything to avoid infection.  But is it?  Surely this is the most important first step?



 

 

My instructions/steps for the day, in case I forget anything;

 

 

 

Everything ready and prepared

 









And ingredients



 07:25  -  The water (liquor in brewing terms) reaches 71.6 degrees and is now added to the mash tun



The mash temperature I am aiming for is 66 degrees so, once the grist (malt) is added, this cools the temperature down to where I want it

 



I now mash at this temperature for 90 minutes which, I'm pleased to say, my new mash tun has managed without dropping a degree. 

 

Meanwhile, I heat up 20.86 litres of liquor to 75.9 degrees for sparging.

 

0900 - Time to sparge (rinse the sugars from the grist)

 

 

 

 

The first runnings.  This is returned to the mash tun until it comes through clear.......

 





 

 

 

.......Like this

 

 

 

 

Pre-boil gravity is 1.032



10:00 - The wort is now transferred into the boiler to give it a rolling boil for 90 minutes.  This drives off any unpleasant enzymes and sterilises the wort.  Hops are added at various times for bittering and aroma. 

 

10:50 - The wort is finally boiling so 46g of Challenger hops are added for bittering.



 

 

12:05  -  More hops are added, 15g of East Kent Goldings for aroma.  Also, the wort cooler is now added to the boiler to sterilise it for the last 15 minutes of the boil

 

 



12:20 - Time to cool the wort down to around 20 degrees.  Ideally, this is done as quickly as possible so the yeast can be pitched, and there will be less chance of infection



12:40 - Just 20 minutes to cool down 26 litres down to pitching temperature.  I'm happy with that!

 

The wort is now transferred to a fermenting vessel and, after being thoroughly aerated (to encourage yeast growth), the yeast is pitched

 



 Original Gravity is 1.052.

 

 

13:30 - Everything cleaned and tidied away! 





 

 

 

Problems:  The only problems I noted were the fact that my OG should have been approx. 1.043 whereas the actual OG is 1.052.  I'm not sure if this is down to a dodgy hydrometer!  The other problem was that hops got stuck in the tap, blocking it, when transferring from the boiler to the FV.  I had thought this might happen so prepared by sterilising a sieve and jug to transfer manually

Rhubarb Wine

My first wine of 2014 is my old favourite, rhubarb.  I have used just under 3 pounds of rhubarb and 2 and a half pounds of sugar.  I am going to boil up a pound of bananas and top up with the strained juice.  This should add some body and, hopefully, a different aroma and flavour.

 

 

Unfortunately, the lovely pink colour will drop out as the wine ferments.

 

I don't have a source of free rhubarb any more so had to buy 3lb for £3.  I'm not sure how this compares to the supermarket price but it's grown locally and, though not certified organic, is grown without chemicals. Add this together with 35p (approx.) for the bananas and £1 for the sugar, it works out at 72p per bottle.  Not as good as 20p obviously, but cheap all the same.

 

More on rhubarb wine can be found here



King Keg Sparkler Tap

I never really got on with the standard fit drum taps on my King Kegs.

The taps seem to have 3 settings;  full on, dripping, or off.

Actually, 'off' is a harder option than it seems and you'll find yourself wrestling with the keg trying to hold it down (especially when under half full and not weighing much), all the while gripping the tap as hard as you can (usually with a towel) to turn it off that last hundredth of a turn to stop it dripping all over the floor.  By this time you've worked up quite a sweat so the beer is swiftly drunk, only then the process has to start over again.

Pouring a decent pint is hard work too as you'll end up with either a pint full of foam, or a half hour wait whilst the beer drips into the glass.

I recently purchased 2 sparkler taps, and what a difference it has made!! 

They fit the King Keg perfectly, it's a simple case of locating the tap in the original hole (making sure the seal is in place) and tightening up the nut at the back.  Then, fill the kegs with water and pressurise with co2 to check for leaks. 

Here is a video of mine in action.  The head on the beer is slightly larger than I would normally pour, I was just trying to demonstrate how quick and easy it is to pull a pint  :-)

 

The nozzle can be adjusted to give different pouring speeds for more/less head which is ideal as it can be adjusted to suit the lower pressure in the keg as it empties and, with the lever in the forward position, the tap will remain open.

They are easy to find, just Google 'brewgas deluxe sparkler tap for king keg' or click here